LithosAnanake/docs/v4.0.0/MACHINE.md

StarForth v4.0.0 — The Machine, its ROM, and the Capsule

Design, 2026-10-15. Captain Bob's rulings in conversation the same day, recorded here. Where this file and NUCLEUS.md disagree, this file wins: it replaces NUCLEUS.md sections 2, 4, 5.3 (what is loaded and by whom), 7 (the nucleus line) and 10. NUCLEUS.md section 6 (POST) stands.

Status (2026-10-15): section 6, steps 1 and 2, is built. The host node boots from its ROM (section 2), which assembles the system's .f18 from the console; the prebuilt nucleus is gone (a73580e9, with the final review's fixes in ff75e69e and a28b5f22). Steps 3 to 6 are not built. Hera still sends a node the host's assembled system, not the ROM (step 4, ruled so for now). The mesh ROM (section 2.2) is designed and not built.

1. The idea

A capsule is a semi-truck. The VM is the tractor. Behind it is the trailer, and the trailer is source.

The Altair 8800 had the machine and no ROM; a loader was toggled in by hand. v4 has the machine and a ROM.

Part	What it is	Where it is
Engine	Executes the 32 F18 opcodes: registers, stacks, memory, ports. Nothing else.	The C golden model (v4/src) now; the FPGA later. The two are the same.
ROM	The VM. A prebuilt binary of F18 opcodes. It assembles .f18 source. It knows no FORTH.	At the head of every capsule; read-only to the node
Trailer	Source, as named blobs. .f18 is F18 assembler. .4th is FORTH. The blob's name gives its type.	The capsule directory (capsules/)

The ROM is the only binary. It runs the same on the C engine and on the FPGA: one binary, the same behaviour. Assemble FORTH from the trailer and the node is a FORTH machine. Assemble Lisp and it would be a Lisp machine. The engine and the ROM do not change.

1.1 What it is for

This is an operating system, not a toy (Captain Bob, 2026-10-15). Once everything is assembled and compiled, the system is a multi-user, multitasking operating system. That is all the boot in section 3 makes.

Then the system's init, init.4th, brings it up:

• it turns on security;
• it starts the system a module at a time and a node at a time;
• whoever is logged in gets a prompt: Zuse, rajames, 00 to 09, or whoever it is.

From the prompt a user can do anything, in FORTH. The operating system's utilities are written in FORTH.

2. The ROM

What it does. It reads a named blob and acts on its type:

• .f18: assembles it into the node's memory. Mnemonics to slots, literals, labels and branches, names for addresses.
• .4th: hands it, a line at a time, to whatever the .f18 source has built. The ROM itself does not interpret FORTH. Until a .f18 has built an interpreter, a .4th cannot be loaded.

What it does not do. No FORTH: no dictionary layout, no :, no INTERPRET, no vocabularies. These are .f18 source.

How it is made. The ROM is written in F18 assembler and assembled once, off the node, as a bitstream is. That build is the only thing done off the node. It produces one ROM per cell width (32 and 64 bits).

Size. Whatever it takes.

Read-only. A store into the ROM is an address fault. Seal and COLD never go below it.

2.1 The ROM is shared code, GA144-style (ruled 2026-10-15)

The ROM is both the tractor's engine and part of the payload's engine. Payload code calls ROM routines at run time, as GA144 applications call their node ROMs. The routines are:

• the tokenizer;
• number conversion;
• the slot packer, branch placement and resolution, which is the code generator for any language built on top;
• a generic table from names to values.

What this asks of the ROM:

• An entry table at the ROM's base, one jump per routine. Payloads call through it, never to an address inside the ROM, so a rebuilt ROM breaks no payload. Each entry's stack effect and the registers it uses (A, B) are listed in DATASHEET-F18.md.
• A reserved, permanent RAM area for the routines' state (token buffer, packer state), fixed in the memory map. Tables needed only while the system assembles may still use dictionary space and be cleared afterwards.
• Nothing language-specific. This is the rule of 7.1, which matters more now that every payload depends on the ROM.

Direction (Captain Bob, 2026-10-15): much more GA144-ish. Take what serves from colorForth's wiring, drop its odd concepts, add our own. That is what v4 becomes, on the way to v5 and later.

2.2 The mesh ROM (designed 2026-10-15)

Status: designed, for review. Not built.

Not every node can carry the ROM of section 2. It is an assembler of about 2100 words, so it belongs to host nodes (JUSTIFICATION.md §9: "the compiler lives on the host node ... mesh nodes receive compiled code"). A mesh node carries a small ROM of shared math, as a GA144 node's ROM carries multiply and divide steps (Captain Bob, 2026-10-15).

A mesh node needs no ROM to take code in. At reset it blocks on its ports and executes what arrives (MESH.md 4.2 and 5). The mesh ROM does not change that. It has no start entry.

One math source. capsules/v4/rom/math.f18 holds six routines and their private helpers. They are moved out of the system's .f18 (core.f18, numout.f18, qmath.f18) unchanged in behaviour. It has no names, no headers and no FORTH (rule 7.1). Its errors are raised as now: Q./ by zero leaves D-11's result and stores 11 into NODE-ERROR. Q./'s five scratch cells stay at (Q/), an address fixed in the memory map, which is the reserved RAM of section 2.1.

Two ROMs, one entry order. Both ROMs begin with the same six entries, written once and used by both tables so that the two orders cannot drift apart:

Entry	Routine	Host ROM	Mesh ROM
0	UM* ( u1 u2 -- ulo uhi )	yes	yes
1	UM/MOD ( ulo uhi ud -- urem uquot )	yes	yes
2	D+ ( d1 d2 -- d3 )	yes	yes
3	DNEGATE ( d -- -d )	yes	yes
4	Q.* ( a b -- c )	yes	yes
5	Q./ ( a b -- q )	yes	yes
6 to 17	the assembler's routines, entries 0 to 11 before this change	yes	no
18	(ROM), where the host machine starts (entry 12 before this change)	yes	no

• The mesh ROM is the six entries and the math: about 150 to 200 words.
• Within a build both ROMs sit at the same base, V4_ROM_BASE. Code the host assembles that calls entry k therefore runs unchanged on a node carrying either ROM.
• v4/tools/mkrom.c builds both ROMs at each cell width. v4/tools/mkmap.c gives each entry's address as a constant (ROM-UM* and so on) for the system's source.
• The renumbering costs nothing: until now nothing but the boot and the tests' harness used an entry number, and both only to start the machine.

The system calls the ROM. UM*, UM/MOD, D+, DNEGATE, Q.* and Q./ keep their dictionary entries in the system. Each one's code becomes a single jump to its ROM entry. Every other word (*, /MOD, U*, number output, the other Q48 words) calls them by name, as now, and is unchanged. Q.TO-INT stays an ordinary system word; the ROM keeps its own copy of that one-line shift rather than making it an entry. dict_hash and rom_hash change, and each must still be the same on every ISA.

Births. A node Hera has born carries the mesh ROM: the fabric's owner attaches it when the node is made (v4_node_rom_attach). The host's assembled system that Hera streams to it then runs its math in the mesh ROM. Today only the test host makes nodes (test_host_unit.c); the products have no births yet.

Tests. Each is written to fail first.

• Each of the six entries, on both ROMs, gives the results today's words give on the same values: 0, -1, the most negative cell, the largest cell, UM/MOD at the edge uhi < ud, and Q./ by zero (error 11 and D-11's result).
• The mesh ROM holds the six entries and the math, and nothing of the assembler.
• Hera's unit test: a node she has born computes UM*, UM/MOD and Q./ and prints the right answers.
• Then the whole suite at both widths, POST 538 of 538, and the three QEMU boots, as .claude/CLAUDE.md says.

Documents. DATASHEET-F18.md lists the entries with each one's stack effect and the registers it uses (A, B), as section 2.1 asks, and its section 13 item 3 says the mesh ROM is built.

Not part of this.

• A real 1024-word mesh node's memory map, where the ROM's base is not the host's (D-4, deferred). Until then a mesh node is the host's size, and both ROMs share one base.
• Births in the products, and the name v4:nucleus-64.f18 that hera.4th opens, which only the test host serves. That is the next correction.

3. The boot

1. The machine. The engine is reset and runs the ROM.

2. The primitives. The loader feeds the system's .f18 blobs to the ROM, which assembles them. They hold everything written in opcodes: the stack and arithmetic words, the registers and ports, and the FORTH machinery itself (the text interpreter, : and ;, the dictionary).

3. FORTH. The interpreter just built compiles the .4th capsules, in three layers (ruled 2026-10-15):

   1. forth79.4th: the FORTH-79 Standard, adhered to 100 percent.
   2. starforth.4th: the StarForth words.
   3. Anything else: every other system capsule, such as starshipos.4th. All three load before POST (section 7, item 4).

   Ruled: the kernel loads them as the system's own vocabulary, before POST and before init.4th, the way v3 registers its words.

4. POST, with the existing test DSL: the case table v4/system/post_cases.c (name, lines, expected error, stack and output) and its runner v4/system/post.c. Seal before it, COLD after, as now.

5. init.4th, the system's init (section 7, item 6). From here the boot is init.4th only. No boot policy is written in C.

6. ok>.

The loader in steps 2 and 3 is whoever owns the machine: the kernel on bare metal, the hosted program on Linux, the ARM side on the Zynq. It finds each blob by name, checks its hash and signature as now (NUCLEUS.md 5.3, items 1–3), and gives the source to the node.

4. Other nodes

A newborn node blocks on its ports and executes what arrives (v4_node_born). Hera births a node by streaming it the ROM through the port that joins them, then the .f18 and .4th blobs it is to carry. Today hera.4th's (NUCLEUS) streams the prebuilt 311-word nucleus; it streams the ROM instead.

5. What changes

Today	Becomes
v4/capsule/*.v4, 14 files, 311 words, assembled on the build machine	.f18 blobs under capsules/v4/, assembled by the ROM at boot
v4/tools/mkimage.c → nucleus-64.f18, a prebuilt dictionary	Builds the ROM only. The nucleus binary is gone.
v4/src/text.c, the assembler in C	The ROM's assembler is F18 code. text.c builds the ROM, as the first assembler builds the next.
forth79.4th: U*, U/MOD only	Every FORTH-79 word that is not an opcode, a register or the FORTH machinery (NUCLEUS.md 4, rule 1). It moves group by group, with POST after each (NUCLEUS.md 8, step 3).
boot_capsules[] in v4/system/boot.c	The system list (step 2, then step 3) is the loader's. Everything after POST is init.4th's.
capsules/v4/starshipos.4th (uncommitted)	A system capsule, loaded before POST

5.1 v3 leaves the build

v3 goes from every build as though it never existed:

• the system= switch and STARFORTH_V4=0;
• v3/src in the kernel and the hosted make;
• the v3 VM (kernel/src/vm/, capsule/);
• the v3 capsules;
• v3's POST and PARITY:M7.1a.

The Tripod, kernel-Hermes, the C ACL and the v3 PKI words go with it. v4 has rebuilt only the start of the Tripod (hera.4th).

POST needs nothing from v3 at run time. post_cases.c is committed. mkpost.py needs a v3 binary only to write the cases again.

6. Order of work

1. The ROM. Write the F18 assembler in F18 assembler. Build it with text.c. On the C engine it must assemble today's .v4 files to the same memory mkimage.c produces. Proof: the same dict_hash, PARITY:V4_POST tests=538 pass=538.
2. The trailer. The .v4 files become .f18 blobs. The boot runs ROM, then .f18, then forth79.4th, then POST. mkimage.c keeps only the ROM.
3. init.4th. It takes over after POST. starshipos.4th joins the system capsules.
4. Hera streams the ROM, not the nucleus.
5. FORTH-79 out of the .f18, group by group, into forth79.4th, with POST after each.
6. v3 out of the build.

Each step is accepted as .claude/CLAUDE.md says:

• three ISAs, clean qemu, booting v4 to ok> with POST passing and dict_hash equal across all three;
• make -C v4 test-32.

7. Ruled 2026-10-15

1. The VM is a machine: registers, a control unit, the opcodes. Names, dictionary entries (text.c's header) and every other part of FORTH are source, not machine.
2. .f18 blobs are plain text, laid out as pretty-printed F18 code. No Block N format.
3. v3 is deleted once v4 is shown at parity with v3, not before. Until then the v3/ tree stays, as the reference to compare against and for mkpost.py.
4. Everything that can load before POST does. That is the system. forth79.4th, starforth.4th and every other system capsule load before POST. POST tests the system.
5. forth79.4th names all 130 Required words, the single-opcode ones (DUP, +, @) included. The .f18 primitives carry their own names; the .f18 layer holds no FORTH-79 names at all.
6. init.4th is the system's init, as init and its rc files are on a Unix system: it initializes the system. Whatever it says runs after POST, and what it says is the system's configuration, not part of this design.