Commit Graph
10 Commits
Author SHA1 Message Date
rajamesandClaude Opus 5.5 1e8a6fed34 feat(kernel): Artemis and Zuse from one disk -- the stick; virtio Artemis leaves v4
sk_v4_identity.c: a USB drive is this system's stick if its GPT has both StarshipOS partitions and
it is the disk the loader booted from (BootDisk's DiskGUID), or, when the boot was not from a
stick, the first such disk while none is attached. Then: its Artemis partition must carry a good
artemis_sig ('Artemis: the stick's signature is bad -- not used' otherwise), is attached first --
the first disk slot -- ('Artemis: the stick's partition attached'), Zuse's key is read from its
genesis marker, and its identity partition is checked and attached as before. Any other drive,
raw or GPT: 'USB: a drive that is not this system's stick -- not used'. On a pull the identity
partition is detached, then Artemis. sk_v4_identity_boot / sk_v4_run take the loader's BootDisk.
kernel_main.c: no virtio Artemis on the v4 path. kernel/Makefile: ARTDISK= attaches no virtio disk
(every QEMU target); ARTDISK stays for system=v3.

STICK.md 4 amended as ruled (R2): on v4 only this system's stick is used; users' drives minted by
this system's Zuse come with the users design after INSTALL. BRINGUP.md: Secure Boot off on every
PC (ruled 2026-10-28), RDRAND in QEMU, the SER5 smoke-test stick, A4 not on v4.

Tests: new stick_artemis (x3, no virtio disk), stick_zuse, two_sticks (replaces datastick),
artemis_unsigned, raw_ident; changed stick_boot, gpt_zuse, gpt_hotplug, midpull (replug) -- all
failed before, pass after (two test defects found and fixed: the signature's offset, the 63-char
log cut). Regression 20/20. Acceptance: amd64, aarch64, riscv64 to [zuse@Hera] ok>, POST 538/538,
dict_hash 0xfec8c47cfc6f437f; v4 suite and test-32 0 failures.

Plan: docs/v4.0.0/plans/2026-10-27-stick-4-one-disk.md, Task 4.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 16:10:33 -04:00
rajamesandClaude Opus 5.5 1b45f5f85f feat(boot): the loader tells the kernel its boot disk; system=v3 is refused on a stick
uefi.h: the UEFI device path and Block I/O protocols, a typed LocateDevicePath, and BootDisk
{gpt, is_stick, disk_guid[16]} appended to BootInfo after args (boot_info_offsets.h unchanged).
The loader, before ExitBootServices, cuts its image's device path at the partition's HardDrive
node, locates the whole disk's Block I/O (whole path consumed, not a logical partition, 512-byte
blocks), reads it as 1 KiB blocks through a loader-side blkio adapter, and runs the kernel's own
gpt_read: is it a StarshipOS stick (identity and Artemis partitions), and its DiskGUID
(gpt_disk_guid, new). No HardDrive node (an ISO/CD boot), no GPT, or any failure: not a stick.
Monolithic builds only (the non-monolithic loader does not link gpt.c, and does not build today:
kernel/src/vm/vm_core.c -- reported, not fixed).

The kernel prints 'Boot disk: a StarshipOS stick' or '... not a StarshipOS stick', and on a stick
system=v3 gives 'System: v3 is not on this stick -- StarForth v4' and boots v4.

Tests: stick_v3 (new), stick_boot and zuse x3 failed on the new lines before, pass after; v3_keys
still boots v3 off a stick. Acceptance: amd64, aarch64, riscv64 to [zuse@Hera] ok>, POST 538/538,
dict_hash 0xfec8c47cfc6f437f; v4 suite and test-32 0 failures.

Plan: docs/v4.0.0/plans/2026-10-27-stick-4-one-disk.md, Task 3.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 12:08:48 -04:00
rajamesandClaude Opus 5.5 95f5afed5c feat(kernel): entropy on the v4 path; QEMU's amd64 CPU has RDRAND, as a PC's
sk_v4_block_chain calls rng_init() after pci_init, with v3's two lines ("entropy: ready" / "entropy:
not available (continuing without)"); genesis on a fresh stick (increment 5) needs it. amd64 QEMU
runs -cpu qemu64,+rdrand (qemu, qemu-stick, qemu-esp) and the amd64 qemu target drops virtio-rng,
so QEMU takes the PC's RDRAND path; aarch64 and riscv64 keep virtio-rng, their only backend.

qemu_session.py: mode entropy (rdrand on amd64, both targets; virtio-rng on aarch64/riscv64; then
entropy: ready). system=v3 sessions get Zuse's raw identity image: v3 never reads a GPT, so the
Zuse stick (Task 1) left v3_keys headless -- found here; CLAUDE.md says so for v3 boots.

Tests: entropy FAIL x4 before, PASS x4 after; v3_keys PASS (rng: backend = rdrand). Acceptance:
amd64, aarch64, riscv64 to [zuse@Hera] ok>, POST 538/538, dict_hash 0xfec8c47cfc6f437f; v4 suite
and test-32 0 failures.

Plan: docs/v4.0.0/plans/2026-10-27-stick-4-one-disk.md, Task 2.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 10:27:07 -04:00
rajamesandClaude Opus 5.5 38b2b9693a test(build): Zuse's minted pair as a stick -- the acceptance boots and the sessions use it
mkdiskimage.sh --starship-from IDENT ART lays a minted pair out as a StarshipOS stick: an identity
partition holding IDENT's bytes and an Artemis partition holding ART's, each exactly its file's
size (Artemis's signature and fence are placed from the volume's size). kernel/Makefile: a
zusestick target, made fresh for every boot, is ZUSEDISK's default (ZUSE_PAIR names the pair);
STICK_PAIR puts the pair in the PC stick. qemu_session.py's Zuse drive is the pair as a stick.
check_images.sh checks both forms byte for byte against the pair (60 PASS).

On today's kernel all 23 sessions pass on the Zuse stick, and acceptance: amd64, aarch64,
riscv64 to [zuse@Hera] ok>, POST 538/538, dict_hash 0xfec8c47cfc6f437f; v4 suite and test-32
0 failures. The plan gains Task 5, screen=boot (ruled 2026-10-28).

Plan: docs/v4.0.0/plans/2026-10-27-stick-4-one-disk.md, Task 1 (R1 as recommended).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 08:41:51 -04:00
rajamesandClaude Opus 5.5 c416c805cb feat(build): QEMU boots the stick; the data stick over USB
qemu-stick boots the amd64 stick image (build/boards/pc/lithos-pc.img,
copied per run) as a USB drive on q35, exactly as hardware would.
DATASTICK=1 adds the data stick to any qemu run as a second USB drive.
qemu_session.py gains --target and the stick_boot and datastick modes.

Checks: stick_boot (the stick's own identity partition attaches, headless
on a blank identity); datastick on amd64/aarch64/riscv64 (both drives
found, the data stick's 500 MiB identity attaches); the seven GPT modes,
the identity-gate and increment 1 sessions, emergency; the suite; three
acceptance boots to [zuse@Hera] ok> with POST 538/538 and
dict_hash=0xfec8c47cfc6f437f; test-32 0 failures.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 16:31:27 -04:00
rajamesandClaude Opus 5.5 2e71f7aa0d fix(kernel): a GPT disk with a bad header, or an unreadable first block, is not used
The increment 2 final review's minors 1-4 (Captain Bob, 2026-10-27: "fix 1-4"):
1. A protective MBR with no "EFI PART" header is GPT_BAD, not GPT_NONE: the
   MBR says it is a GPT disk, and a GPT disk is never attached whole.
2. A disk whose block 0 cannot be read is GPT_EIO: "GPT: a USB drive could
   not be read -- not used", nothing attached (it was read raw, attached
   whole, and a raw Zuse drive behind it logged her in).
3. The entry array's LBA is checked against the disk's size directly.
4. gpt_bad_entries: the entry array changed, the header valid -- refused.
Harness modes gpt_no_header, gpt_read_error (blkdebug EIO on sector 0),
gpt_bad_entries. The plan carries the amendment.

Red (amd64): gpt_no_header 070335, gpt_read_error 070717 FAIL;
gpt_bad_entries 070048 PASS (existing check, now pinned). Green: every GPT
mode on amd64 071113-072933; gpt_zuse, gpt_read_error, gpt_no_header on
aarch64 073222-074047 and riscv64 074526-075535; the identity gate's and
increment 1's sessions 080036-082345, emergency 083130 (082635 was run
without EMERGENCY_CONSOLE_ENABLED=1 -- a harness invocation error).
Accepted: suite EXIT 0; 093121, 093352, 093750, POST 538/538, dict_hash
0xfec8c47cfc6f437f; test-32, 0 failures.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 12:17:00 -04:00
rajamesandClaude Opus 5.5 3cc4937c93 feat(kernel): the GPT reader, and Zuse from a GPT identity partition
The stick, increment 2 (plan 2026-10-26-stick-2-gpt-reader; docs/v4.0.0/
STICK.md 3 and 4: GPT for boot media and installed disks). kernel/src/gpt.c:
a CRC-32; gpt_read(), which checks the protective MBR, the primary header and
the partition-entry array (both CRCs, the revision, the sizes, the geometry);
and a partition as a blkio device, refusing blocks past its end. The two
StarshipOS partition types: identity 23BEBFE1-4817-4CF3-A537-9069BF159788,
Artemis BCD7B586-1C8E-4EEF-86A3-273A8D8EE624.

The v4 drive path: a GPT disk is used only through its StarshipOS identity
partition, and that partition -- never the disk -- is given to the block
subsystem, in a raw identity drive's place; a GPT disk with no StarshipOS
partition, or a damaged table ("GPT: a USB drive has a damaged partition
table -- not used"), is not attached (Captain Bob's ruling on the plan); a
disk with no GPT is read raw, as always. Pulling the drive detaches the
partition and ends her session. Reads only.

Red (amd64): gpt_zuse 193158, gpt_hotplug 193804, gpt_foreign 194713,
gpt_bad_crc 194947. Green: 195409, 195627, 195854, 200136; gpt_zuse aarch64
200424, riscv64 200839 (the 64 MiB partition attached, 48724 user blocks,
not the 72 MiB disk); the identity gate's and increment 1's sessions,
201119-203403, all pass.
Accepted (with the KERNEL_ARGS fix that follows): suite EXIT 0; 214300,
214507, 214911, POST 538/538, dict_hash 0xfec8c47cfc6f437f; test-32, 39
modules, 0 failures.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 21:56:31 -04:00
rajamesandClaude Opus 5.5 a78cc56c31 fix(v4): nothing of a session left on screen after logout
From the fresh review of the stick's increment 1 (With fixes):
- Critical: after logout Zuse's last screen, her prompt included, could be
  drawn back on a headless machine. The logout clear (ESC[2J) blanked the
  pixels only: Alt+TAB, still read while headless, redrew the terminal
  from its saved text; and if she had Alt+TABbed to the graphics view
  before the pull, the clear did nothing and her session stayed on screen
  (and the console did not draw at her next login). Now vt100_reset()
  forgets everything the terminal has shown -- the on-screen text, the
  scrollback and their boot snapshots -- makes it visible again and fills
  the screen; and Alt+TAB does nothing while the screen is off (v3's never
  is, so v3 is unchanged).
- Important: an EMERGENCY_CONSOLE_ENABLED build no longer clears the screen
  when Zuse's drive is pulled: its console goes on running.

Red: alttab_after_logout 183308 (4515 lit), alttab_before_pull 183529
(4539 lit; the console not redrawn), emergency_pull 183759 (0 lit).
Green: 184115, 184328, 184552; regression 184805-185956 (screens,
keyboard, hotplug, emergency, v3 typed by keyboard) all pass.
Accepted: 190111, 190312, 190710, POST 538/538, dict_hash
0xfec8c47cfc6f437f; test-32, 39 modules, 0 failures.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 19:14:22 -04:00
rajamesandClaude Opus 5.5 cab0ffb487 feat(v4): the screen and the keyboards
The stick, increment 1, task 2 (plan 2026-10-26-stick-1-screen-and-keyboard;
docs/v4.0.0/STICK.md 2, 5.3, 5.4). On the v4 path:
- the framebuffer is brought up after POST, cleared and dark: console text
  goes to serial only ("splash only, log on serial") until Zuse logs in;
  then the screen is the console (TTF, a blinking cursor, as v3's), and
  when she logs out it is cleared and dark again (console_fb_mirror(),
  console_fb_clear(); the mirror is on by default, so v3 is unchanged);
- the line editor and the node's KEY read every keyboard -- PS/2, USB, the
  virtio keyboard -- through the shared bridge (sk_input_getc()); the
  headless wait drops keyboard input as well as serial bytes;
- an EMERGENCY_CONSOLE_ENABLED build has the screen from the start.
The framebuffer setup is one helper both paths call (kernel_main.c).

Red (before): screen_dark_until_login 153051 (10835 lit), console/keys
153309, logout 153609, kbd_typeahead 153918, virtio_kbd aarch64 154245
and riscv64 154718; no_framebuffer 155546 passed before and after.
Green: 155926 (0 lit), 160156, 160409 (0 lit after logout), 160630,
virtio_kbd 161414 and 161820, no_framebuffer 161206; usb_kbd with the USB
keyboard the only one (-machine i8042=off) 164548, v3 control 164757;
the identity gate's sessions 162245-163802 all pass; v3 typed by keyboard
164009, 164115. (usb_kbd 160857 and 164313 failed in the harness:
input-send-event's device names a display, not a keyboard.)
Accepted: suite EXIT 0; three clean qemu boots, POST 538/538, dict_hash
0xfec8c47cfc6f437f unchanged (174704, 174911, 175315); test-32, 39
modules, 0 failures.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 18:02:27 -04:00
rajamesandClaude Opus 5.5 83d3692976 refactor(kernel): the keyboard bridge, shared
The stick, increment 1, task 1 (plan 2026-10-26-stick-1-screen-and-keyboard).
repl.c's keyboard bridge -- the key tables, Shift/Alt/Caps Lock/Num Lock and
their lights, the keypad, Alt+TAB, and the per-tick USB keyboard servicing --
moves unchanged to kernel/src/hal/kbd_input.c as sk_input_getc() (and
sk_input_drop()), so that the v4 boot's console reads the same keyboards
(docs/v4.0.0/STICK.md 5.4). v3's behaviour is unchanged.

scripts/qemu_session.py: the typed-QEMU-session harness, kept in the repo
from here on (the identity gate's sessions, and v3_keys: system=v3 typed on
QEMU's keyboard with send-key).

Yardstick, system=v3 typed by keyboard: before, amd64 PS/2 134805 PASS,
aarch64 virtio keyboard 135549 PASS; after, 135746 and 135835 PASS.
(riscv64 134850: v3 never reached its prompt -- Artemis virtio_blk writes
time out; v3's block path, before this change; being investigated.)
Accepted: suite EXIT 0; three clean qemu boots to [zuse@Hera] ok>, POST
538/538, dict_hash 0xfec8c47cfc6f437f (145722, 145859, 150231); test-32,
39 modules, 0 failures.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 15:09:38 -04:00