feat(boards): both systems on every board image, chosen at boot -- system=v3 or system=v4
boards/BRINGUP.md A6, FABRIC-3 SXLIII (ruled: one image, switch at boot). A STARFORTH_V4 kernel carries v3 too; system= in the boot arguments chooses, else the build's default (V4_DEFAULT: 1 for plain STARFORTH_V4 builds as before, 0 for board images). make boot_image builds both and always writes starforth.cfg / cmdline.txt with system=v3 first, and cleans its ISA's objects first -- that clean was removing build/<arch>/SER5, not the kernel's objects, until fixed here. Each ISA: v3 by default (hash unchanged), v4 with system=v4 (538/538). The SER5 image under OVMF: v3 as built, v4 after a one-word edit on it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
rajames
co-authored by
Claude Opus 5.5
Claude Opus 5.5
parent
e729c64ba3
commit
1a4b163861
@@ -95,8 +95,15 @@ boot_image:
|
||||
echo " $(call board_field,$(TARGET),BOARD_DESC)"; \
|
||||
exit 1; \
|
||||
fi
|
||||
@# Both systems in one image, v3 unless the boot arguments say system=v4
|
||||
@# (boards/BRINGUP.md A6, ruled 2026-10-14). A clean build every time: the
|
||||
@# kernel objects are shared with `make qemu`, and make does not see a
|
||||
@# change of compile flags -- an image could otherwise carry objects built
|
||||
@# without v4, or without the bring-up console.
|
||||
@$(SUBMAKE) -f kernel/Makefile ARCH=$(call board_arch,$(TARGET)) TARGET=kernel clean
|
||||
@$(SUBMAKE) -f kernel/Makefile \
|
||||
BOARD=$(BOARD_DIR) ARCH=$(call board_arch,$(TARGET)) TARGET=kernel boot_image
|
||||
BOARD=$(BOARD_DIR) ARCH=$(call board_arch,$(TARGET)) TARGET=kernel \
|
||||
STARFORTH_V4=1 V4_DEFAULT=0 boot_image
|
||||
|
||||
boot_images:
|
||||
@for b in $(READY_BOARDS); do \
|
||||
|
||||
+6
-4
@@ -28,7 +28,7 @@ None has been fixed: each needs your word.
|
||||
| A3 | **Fixed 2026-10-14.** A USB boot-protocol keyboard is driven (xHCI interrupt endpoint, `SET_PROTOCOL(boot)`), its reports become the same key events as the PS/2 and virtio keyboards, and the console treats a full keyboard as one: Caps Lock and Num Lock as toggles shown on the keyboard's lights, the keypad as digits or navigation, the arrows and navigation block mapped (the line editor itself still has no cursor movement). While a USB keyboard runs, the console services its reports every timer tick. | `kernel/src/usb/usb_kbd.c`, `kernel/src/usb/xhci.c`, `kernel/src/repl.c`; `FABRIC-3.md` XLI | Rehearsed in QEMU on all three ISAs; on amd64 with the USB keyboard the only keyboard. Limits: a keyboard whose first interface is not the keyboard is not used; no key repeat. Several keyboards, on any controllers, each its own. |
|
||||
| A4 | **The only disk driver is virtio.** | `kernel/src/virtio/virtio_blk.c`; `kernel_main.c:493` | On hardware Artemis finds no disk ("Artemis: no virtio-blk disk"). What the fleet then does has not been tried even in QEMU: see step 3.3. |
|
||||
| A5 | **Entropy:** RDRAND on amd64 only. aarch64 and riscv64 have virtio-rng alone. | `kernel/src/rng/rng.c` | Pi 5 and Mars print the "no entropy backend available" warning; anything that needs random bytes is refused. Minting needs them. |
|
||||
| A6 | **The board images cannot build the v4 node.** `make boot_image` has no `STARFORTH_V4` path. | root `Makefile`, `kernel/Makefile` | Ruled 2026-10-13: both systems, switchable. Not built yet. |
|
||||
| A6 | **Fixed 2026-10-14.** Every board image carries both systems, v3 and v4, and the boot arguments choose: `system=v3` (as built) or `system=v4` -- one word in `starforth.cfg` on the SER5's and the Mars's stick or card, in `cmdline.txt` on the Pi 5's card. No rebuild to switch. | root `Makefile`, `kernel/Makefile`, `kernel/src/kernel_main.c`, `kernel/src/boot/cmdline.c`; `FABRIC-3.md` XLIII | The SER5 image itself, booted under OVMF: v3 as built, v4 after the one-word edit. The boot says which system runs and why ("System: ..."). |
|
||||
|
||||
### 1.2 SER5
|
||||
|
||||
@@ -132,9 +132,11 @@ make boot_image TARGET=RASPI EMERGENCY_CONSOLE_ENABLED=1
|
||||
make boot_image TARGET=MILKV EMERGENCY_CONSOLE_ENABLED=1
|
||||
```
|
||||
|
||||
- [ ] **`make clean TARGET=<board>` first.** The switch is compiled in, and objects built
|
||||
without it are not rebuilt when it changes: an image built over old objects boots
|
||||
headless (seen 2026-10-13).
|
||||
- [ ] ~~`make clean TARGET=<board>` first.~~ `make boot_image` now cleans its ISA's kernel
|
||||
objects itself (2026-10-14): make does not see a change of compile flags, and an image
|
||||
built over old objects booted headless (2026-10-13) or would have lacked v4.
|
||||
- [ ] To boot v4 instead of v3: change `system=v3` to `system=v4` in `starforth.cfg` (SER5,
|
||||
Mars) or `cmdline.txt` (Pi 5) on the medium. The boot prints "System: ..." with the choice.
|
||||
- [ ] Each ends with its image in `build/boards/<board>/`. Record `sha256sum` of each.
|
||||
- [ ] Confirm the switch took: the image booted in QEMU (3.2) shows a prompt with no
|
||||
thumbdrive attached. After a clean build it does (tried on `MILKV`).
|
||||
|
||||
@@ -5853,3 +5853,37 @@ hot-plugged onto the second controller all attach, and unplugging one detaches t
|
||||
`-141953`). Standard acceptance, all three: POST 1052, hash unchanged (`-142120`, `-142237`,
|
||||
`-142449`); five identities hot-plugged on the first controller, all attached (`-142606`).
|
||||
|
||||
## XLIII. Both systems on every board image, chosen at boot (`boards/BRINGUP.md` A6) (2026-10-14)
|
||||
|
||||
Captain Bob, 2026-10-13, ruled the boards carry "both, switchable"; asked 2026-10-14 where the
|
||||
switch is: **at boot, one image** -- a word in the boot configuration, v3 as built.
|
||||
|
||||
**Built.**
|
||||
- `STARFORTH_V4=1` already compiled the v4 engine in; `kernel_main` then ran v4 unconditionally.
|
||||
Now it runs v4 only if the boot arguments say `system=v4`, or say nothing and the build's
|
||||
default is v4 (`SK_V4_DEFAULT`, from `kernel/Makefile`'s `V4_DEFAULT`: 1 for a plain
|
||||
`STARFORTH_V4=1` build, as before, so every v4 QEMU boot and test is unchanged). Otherwise v3,
|
||||
which is compiled in alongside, runs. A kernel without v4 asked for it says so and runs v3. The
|
||||
boot prints the choice and why: "System: StarForth v4 (system=v4)", "... (this build's
|
||||
default)", ...
|
||||
- `cmdline.c`: `system=v3` / `system=v4` (also `--system=`), a later one winning; anything else is
|
||||
ignored, as every unknown argument is.
|
||||
- `make boot_image`: `STARFORTH_V4=1 V4_DEFAULT=0` -- both systems, v3 unless asked -- and the
|
||||
boot arguments file always written, `system=v3` first: `starforth.cfg` on the ESP (SER5, Mars),
|
||||
`cmdline.txt` on the Pi 5's card (the firmware hands it over as the devicetree's `bootargs`).
|
||||
- `make boot_image` also cleans its ISA's kernel objects first: they are shared with `make qemu`
|
||||
and make does not see changed compile flags. Found doing it: the clean was handed the root's
|
||||
`TARGET=SER5` and removed `build/amd64/SER5`, nothing -- the first SER5 image carried the v4
|
||||
engine but a `kernel_main` compiled without it. Now `TARGET=kernel`; all three images checked to
|
||||
carry both.
|
||||
|
||||
**Verified.** Board-style build (both, v3 default), each ISA: no argument -- v3, POST 1052, hash
|
||||
unchanged; `system=v4` -- v4, `PARITY:V4_POST tests=538 pass=538`, `dict_hash=0xe5a57f3eb72ff94a`
|
||||
(amd64 `logs/20261014-144027`, `-144141`; aarch64 `-144411`, `-144604`; riscv64 `-144934`,
|
||||
`-145108`). A plain `STARFORTH_V4=1` build still boots v4 by default (`-145331`); a v3-only kernel
|
||||
asked for v4 says so and runs v3 (`-145550`). The SER5 image itself, booted from its own disk under
|
||||
OVMF (`logs/20261014-ser5-image/`): v3 as built; after changing the one word in `starforth.cfg` on
|
||||
it, v4. The Pi 5 and Mars images: built, their `cmdline.txt` / `starforth.cfg` read back from the
|
||||
image, both systems found in their kernels; not booted (no QEMU model for either). Standard
|
||||
acceptance, all three ISAs: unchanged (`-150651`, `-150801`, `-151007`).
|
||||
|
||||
|
||||
+15
-7
@@ -620,8 +620,13 @@ endif
|
||||
# ISA this kernel boots on has (DECOMPOSITION.md D-5), so the image is the
|
||||
# same file for all three.
|
||||
# ------------------------------------------------------------------------------
|
||||
# V4_DEFAULT: with v4 built in, whether it runs when the boot arguments
|
||||
# name no system (A6, 2026-10-14). 1 for a plain STARFORTH_V4=1 build, as
|
||||
# before; board images build with both and V4_DEFAULT=0 -- v3 unless
|
||||
# `system=v4` (root Makefile, boot_image).
|
||||
V4_DEFAULT ?= 1
|
||||
ifeq ($(STARFORTH_V4),1)
|
||||
V4_DEFS := -DSTARFORTH_V4=1 -Iv4/include \
|
||||
V4_DEFS := -DSTARFORTH_V4=1 -DSK_V4_DEFAULT=$(V4_DEFAULT) -Iv4/include \
|
||||
-DV4_CELL_BITS=64 -DV4_NODE_WORDS=16384 -DV4_DATA_RING=30 -DV4_RET_RING=31
|
||||
KERNEL_CFLAGS += $(V4_DEFS)
|
||||
LOADER_CFLAGS += $(V4_DEFS)
|
||||
@@ -1283,13 +1288,15 @@ else ifeq ($(BOARD_BOOT),uefi-esp)
|
||||
boot_image: all
|
||||
@mkdir -p $(BOARD_OUT)
|
||||
@printf 'FS0:\\EFI\\BOOT\\%s\r\n' "$(EFI_BOOTNAME)" > $(BOARD_OUT)/startup.nsh
|
||||
@rm -f $(BOARD_OUT)/starforth.cfg
|
||||
$(if $(KERNEL_ARGS),@printf '%s\n' '$(KERNEL_ARGS)' > $(BOARD_OUT)/starforth.cfg)
|
||||
@# The boot arguments, always written: system=v3 first, so that which
|
||||
@# system runs is one word to change on the stick (A6); KERNEL_ARGS
|
||||
@# after it, and a later system= wins.
|
||||
@printf '%s\n' 'system=v3 $(KERNEL_ARGS)' > $(BOARD_OUT)/starforth.cfg
|
||||
@bash scripts/mkdiskimage.sh --out $(BOARD_OUT)/$(BOARD_IMAGE) --table gpt \
|
||||
--size-mib $(BOOT_IMAGE_SIZE_MIB) --label LITHOS \
|
||||
$(LOADER_EFI):/EFI/BOOT/$(EFI_BOOTNAME) \
|
||||
$(BOARD_OUT)/startup.nsh:/startup.nsh \
|
||||
$(if $(KERNEL_ARGS),$(BOARD_OUT)/starforth.cfg:/starforth.cfg)
|
||||
$(BOARD_OUT)/starforth.cfg:/starforth.cfg
|
||||
@echo "$(BOARD_DESC)"
|
||||
@echo "Write with: dd if=$(BOARD_OUT)/$(BOARD_IMAGE) of=/dev/sdX bs=4M conv=fsync status=progress"
|
||||
else ifeq ($(BOARD_BOOT),rpi-native)
|
||||
@@ -1303,14 +1310,15 @@ $(RPI5_DTB):
|
||||
|
||||
boot_image: v3/include/version.h $(RPI5_NATIVE_IMG) $(RPI5_DTB)
|
||||
@mkdir -p $(BOARD_OUT)
|
||||
@rm -f $(BOARD_OUT)/cmdline.txt
|
||||
$(if $(KERNEL_ARGS),@printf '%s\n' '$(KERNEL_ARGS)' > $(BOARD_OUT)/cmdline.txt)
|
||||
@# cmdline.txt, always: the firmware hands it to the kernel as the
|
||||
@# devicetree's bootargs. system=v3 first, one word to change (A6).
|
||||
@printf '%s\n' 'system=v3 $(KERNEL_ARGS)' > $(BOARD_OUT)/cmdline.txt
|
||||
@bash scripts/mkdiskimage.sh --out $(BOARD_OUT)/$(BOARD_IMAGE) --table mbr \
|
||||
--size-mib $(BOOT_IMAGE_SIZE_MIB) --label LITHOS \
|
||||
boards/$(BOARD)/config.txt:/config.txt \
|
||||
$(RPI5_NATIVE_IMG):/kernel_2712.img \
|
||||
$(RPI5_DTB):/bcm2712-rpi-5-b.dtb \
|
||||
$(if $(KERNEL_ARGS),$(BOARD_OUT)/cmdline.txt:/cmdline.txt)
|
||||
$(BOARD_OUT)/cmdline.txt:/cmdline.txt
|
||||
@echo "$(BOARD_DESC)"
|
||||
@echo "Write with: dd if=$(BOARD_OUT)/$(BOARD_IMAGE) of=/dev/mmcblkX bs=4M conv=fsync status=progress"
|
||||
else
|
||||
|
||||
@@ -23,6 +23,8 @@
|
||||
* --log-level=<level> debug / info / warn / error
|
||||
* --stack=<N>[KMG] stack_size in bytes
|
||||
* --heap=<N>[KMG] heap_size in bytes
|
||||
* system=v3 | system=v4 which system runs, where both are built in
|
||||
* ("--system=" too)
|
||||
*/
|
||||
void cmdline_parse_ascii(const char *cmdline, KernelArgs *args);
|
||||
|
||||
|
||||
@@ -21,6 +21,12 @@
|
||||
#define KARGS_DEFAULT_HEAP_SIZE (2ULL * 1024ULL * 1024ULL * 1024ULL) /* 2 GB */
|
||||
#define KARGS_DEFAULT_LOG_LEVEL 2 /* warn — quiet by default; --log-level=info/debug re-enables ECW word-execution tracing */
|
||||
#define KARGS_DEFAULT_RUN_DOE 0
|
||||
/* Which system runs, where a kernel carries both (boards/BRINGUP.md A6,
|
||||
* ruled 2026-10-14: one image, chosen at boot). DEFAULT means the build's
|
||||
* own default (kernel/Makefile V4_DEFAULT). */
|
||||
#define KARGS_SYSTEM_DEFAULT 0
|
||||
#define KARGS_SYSTEM_V3 3
|
||||
#define KARGS_SYSTEM_V4 4
|
||||
|
||||
/* ---- Log level constants ------------------------------------------------ */
|
||||
#define KARGS_LOG_DEBUG 0
|
||||
@@ -43,6 +49,7 @@ typedef struct {
|
||||
/* Runtime behaviour */
|
||||
int run_doe; /* --doe (0 = off) */
|
||||
int log_level; /* --log-level=... (KARGS_LOG_*) */
|
||||
int system; /* system=v3 | system=v4 (KARGS_SYSTEM_*), 2026-10-14 */
|
||||
|
||||
/* Raw unparsed cmdline; always NUL-terminated */
|
||||
char raw[KERNEL_ARGS_CMDLINE_MAX];
|
||||
|
||||
@@ -186,6 +186,7 @@ void cmdline_parse_ascii(const char *cmdline, KernelArgs *args) {
|
||||
args->heap_size = 0;
|
||||
args->run_doe = KARGS_DEFAULT_RUN_DOE;
|
||||
args->log_level = KARGS_DEFAULT_LOG_LEVEL;
|
||||
args->system = KARGS_SYSTEM_DEFAULT;
|
||||
args->raw[0] = '\0';
|
||||
|
||||
if (!cmdline || !*cmdline) return;
|
||||
@@ -207,6 +208,14 @@ void cmdline_parse_ascii(const char *cmdline, KernelArgs *args) {
|
||||
if (tok_len == 5 && sf_strncmp(tok, "--doe", 5) == 0) {
|
||||
args->run_doe = 1;
|
||||
|
||||
/* system=v3 | system=v4, with or without "--": which system runs,
|
||||
* on a kernel that carries both (2026-10-14, A6) */
|
||||
} else if ((tok_len == 9 && sf_strncmp(tok, "system=v", 8) == 0) ||
|
||||
(tok_len == 11 && sf_strncmp(tok, "--system=v", 10) == 0)) {
|
||||
char v = tok[tok_len - 1];
|
||||
if (v == '3') args->system = KARGS_SYSTEM_V3;
|
||||
else if (v == '4') args->system = KARGS_SYSTEM_V4;
|
||||
|
||||
/* --log-level=<level> (prefix = 12 chars) */
|
||||
} else if (tok_len > 12 && sf_strncmp(tok, "--log-level=", 12) == 0) {
|
||||
args->log_level = parse_log_level(tok + 12);
|
||||
|
||||
@@ -561,12 +561,31 @@ static void kernel_main_deep(BootInfo *boot_info) {
|
||||
console_println("Kernel initialization complete.");
|
||||
console_println("Boot successful!\n");
|
||||
|
||||
/* Which system runs (boards/BRINGUP.md A6, ruled 2026-10-14: one image,
|
||||
* both systems, chosen at boot). A kernel built with STARFORTH_V4
|
||||
* carries v4 as well as v3; `system=v3` or `system=v4` among the boot
|
||||
* arguments (starforth.cfg on the ESP, cmdline.txt on the Pi 5) picks,
|
||||
* else the build's default (SK_V4_DEFAULT: on for a plain STARFORTH_V4
|
||||
* build, off for a board image). */
|
||||
#ifdef STARFORTH_V4
|
||||
/* StarForth v4 at a single prompt (Kconfig STARFORTH_V4): one host node
|
||||
* of the F18-derived engine, in place of the v3 VM and everything below.
|
||||
* It does not return. */
|
||||
sk_v4_boot_info = boot_info;
|
||||
sk_v4_run(sk_v4_block_chain);
|
||||
if (boot_info->args.system == KARGS_SYSTEM_V4 ||
|
||||
(boot_info->args.system == KARGS_SYSTEM_DEFAULT && SK_V4_DEFAULT)) {
|
||||
console_println(boot_info->args.system == KARGS_SYSTEM_V4
|
||||
? "System: StarForth v4 (system=v4)"
|
||||
: "System: StarForth v4 (this build's default)");
|
||||
/* StarForth v4 at a single prompt: one host node of the F18-derived
|
||||
* engine, in place of the v3 VM and everything below. It does not
|
||||
* return. */
|
||||
sk_v4_boot_info = boot_info;
|
||||
sk_v4_run(sk_v4_block_chain);
|
||||
}
|
||||
console_println(boot_info->args.system == KARGS_SYSTEM_V3
|
||||
? "System: StarForth v3 (system=v3)"
|
||||
: "System: StarForth v3 (this build's default; system=v4 for v4)");
|
||||
#else
|
||||
console_println(boot_info->args.system == KARGS_SYSTEM_V4
|
||||
? "System: StarForth v3 -- system=v4 asked for, and this kernel has no v4"
|
||||
: "System: StarForth v3");
|
||||
#endif
|
||||
|
||||
#ifdef STARFORTH_ENABLE_VM
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,121 @@
|
||||
[2J[001;001H[=3h[2J[001;001H[2J[001;001H[8;042;160t[2J[001;001H[2J[001;001H[8;056;240t[2J[001;001HBdsDxe: loading Boot0002 "UEFI QEMU DVD-ROM QM00005 " from PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x2,0xFFFF,0x0)
|
||||
BdsDxe: starting Boot0002 "UEFI QEMU DVD-ROM QM00005 " from PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x2,0xFFFF,0x0)
|
||||
[2J[001;001H[=3h[2J[001;001HStarKernel UEFI Loader
|
||||
Loading kernel from ESP...
|
||||
[CKPT 001] Entered efi_main - ConOut live
|
||||
RAW SERIAL UP
|
||||
[CKPT 002] Serial (COM1) initialized
|
||||
Monolithic build - kernel linked directly
|
||||
Collecting boot information...
|
||||
CmdLine: from starforth.cfg
|
||||
CmdLine: parsed OK
|
||||
[CKPT 004] Command line parsed
|
||||
[CKPT 005] Kernel stack allocation decided
|
||||
[CKPT 006] Boot info collected (ACPI table located)
|
||||
GOP: linear framebuffer found
|
||||
[CKPT 007] GOP: linear framebuffer found
|
||||
[CKPT 008] About to enter ExitBootServices retry loop
|
||||
EBS...
|
||||
EBS OK
|
||||
Calling kernel_main (monolithic)...
|
||||
|
||||
|
||||
_____ _ _ __ _
|
||||
/ ____| | | |/ / | |
|
||||
| (___ | |_ __ _ _ __| ' / ___ _ __ _ __ ___| |
|
||||
\___ \| __/ _` | '__| < / _ \ '__| '_ \ / _ \ |
|
||||
____) | || (_| | | | . \ __/ | | | | | __/ |
|
||||
|_____/ \__\__,_|_| |_|\_\___|_| |_| |_|\___|_|
|
||||
|
||||
LithosAnanke v2.1.0 amd64
|
||||
Architecture: amd64
|
||||
Build: Oct 14 2026 14:41:12
|
||||
|
||||
UEFI BootServices: EXITED
|
||||
Console: serial line is a 16550 at port 0x00000000000003f8 (COM1, probed)
|
||||
|
||||
=== StarKernel Boot Information ===
|
||||
Memory map entries: 131
|
||||
Total memory: 1023 MB
|
||||
Usable memory: 966 MB
|
||||
===================================
|
||||
|
||||
PMM initialized.
|
||||
PMM statistics:
|
||||
Total pages: 248727
|
||||
Free pages : 247204
|
||||
Used pages : 1523
|
||||
Total MB : 971
|
||||
Free MB : 965
|
||||
Used MB : 5
|
||||
|
||||
VMM initialized (mapped RAM, CR3 switched)
|
||||
VMM initialized (mapped RAM, CR3 switched)
|
||||
VMM self-test: mapped OK at 0xffff800000000000
|
||||
VMM self-test complete.
|
||||
|
||||
IDT installed.
|
||||
|
||||
APIC: init...
|
||||
APIC: IA32_APIC_BASE MSR=0x00000000fee00900
|
||||
APIC: stale-ISR drain: 0 EOI(s) issued
|
||||
APIC: initialized (xAPIC MMIO, TPR=0, SIVR=0x1FF, EOI-clear)
|
||||
APIC: init done
|
||||
|
||||
I/O APIC: init...
|
||||
I/O APIC: base=0xfec00000, gsi_base=0, overrides=5
|
||||
override: source=00 gsi=2 flags=0x0000
|
||||
override: source=05 gsi=5 flags=0x000d
|
||||
override: source=09 gsi=9 flags=0x000d
|
||||
override: source=0a gsi=10 flags=0x000d
|
||||
override: source=0b gsi=11 flags=0x000d
|
||||
i8042: keyboard ACKed enable-scanning
|
||||
i8042: IRQ1 enabled in controller config byte
|
||||
I/O APIC: keyboard IRQ1 routed (masked)
|
||||
|
||||
Timer: init...
|
||||
Timer: init start
|
||||
Timer: PM_TMR_BLK discovered from FADT at port 1544
|
||||
Timer: VM mode detected (hypervisor present).
|
||||
Timer: HPET calibration disabled (VM-exit MMIO would poison timing).
|
||||
Timer: WARNING: invariant TSC not present under hypervisor.
|
||||
Timer: continuing in RELATIVE mode (no determinism guarantees).
|
||||
Timer: RDTSCP not present; using RDTSC (less serialized).
|
||||
Timer: CPUID frequency unavailable; trying PM Timer...
|
||||
Timer: trust=1 (0=NONE,1=REL,2=ABS), TSC=2100939630 Hz
|
||||
Timer: init done
|
||||
|
||||
Kernel heap initialized.
|
||||
Heap statistics:
|
||||
Total bytes: 536870872
|
||||
Free bytes: 536870872
|
||||
Used bytes: 0
|
||||
Peak bytes: 0
|
||||
Heap base addr: 24641536
|
||||
Heap end addr: 561512448
|
||||
|
||||
Heartbeat: init...
|
||||
APIC Timer: calibrating...
|
||||
APIC Timer: apic_hz=1009706814, tick_hz=100, initial_count=10097068
|
||||
APIC Timer: configured (masked, ready to start)
|
||||
Heartbeat: init done
|
||||
Kernel initialization complete.
|
||||
Boot successful!
|
||||
|
||||
System: StarForth v4 (system=v4)
|
||||
StarForth v4: one host node, the F18-derived engine
|
||||
V4: capsule v4:nucleus-64.f18 signature: missing (unsigned)
|
||||
PARITY:V4_NUCLEUS name=v4:nucleus-64.f18 capsule_id=0x3b4a82485b10bfb7 capsule_hash=0x3b4a82485b10bfb7 words=311
|
||||
V4: capsule v4:forth79.4th signature: missing (unsigned)
|
||||
PARITY:V4_CAPSULE name=v4:forth79.4th capsule_id=0x4055641ee17d176b capsule_hash=0x4055641ee17d176b dict_hash=0x6b56e15226ee3719
|
||||
PARITY:V4_POST tests=538 pass=538 fail=0
|
||||
PARITY:V4_SYSTEM word_count=317 dict_hash=0xe5a57f3eb72ff94a
|
||||
PARITY:OK
|
||||
POST: PASSED
|
||||
[32m[HADES][INFO ] [0m[KRELTSC: 0] blk: raw device LBN 2048..3071 (1024 blocks)
|
||||
PCI: init...
|
||||
PCI: ECAM mapped (amd64)
|
||||
virtio-blk: found device
|
||||
[32m[HADES][INFO ] [0m[KRELTSC: 76839588] blk: disk 'StarForth Volume' v2 LBN 3072..789009 (785938 user b
|
||||
Artemis: virtio-blk attached
|
||||
ok>
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,93 @@
|
||||
UEFI firmware (version 2025.11-3ubuntu7.3 built at 15:40:26 on Sep 23 2026)
|
||||
[2J[001;001H[=3h[2J[001;001H[2J[001;001H[8;031;100t[2J[001;001HBdsDxe: failed to load Boot0002 "UEFI Misc Device" from PciRoot(0x0)/Pci(0x2,0x0): Not Found
|
||||
BdsDxe: failed to load Boot0003 "UEFI QEMU QEMU USB HARDDRIVE 1-0000:00:04.0-1" from PciRoot(0x0)/Pci(0x4,0x0)/USB(0x0,0x0): Not Found
|
||||
BdsDxe: loading Boot0004 "UEFI Misc Device 2" from PciRoot(0x0)/Pci(0x6,0x0)
|
||||
BdsDxe: starting Boot0004 "UEFI Misc Device 2" from PciRoot(0x0)/Pci(0x6,0x0)
|
||||
[2J[001;001H[=3h[2J[001;001HStarKernel UEFI Loader
|
||||
Loading kernel from ESP...
|
||||
[CKPT 001] Entered efi_main - ConOut live
|
||||
Collecting boot information...
|
||||
[CKPT 004] Command line parsed
|
||||
[CKPT 005] Kernel stack allocation decided
|
||||
[CKPT 006] Boot info collected (ACPI table located)
|
||||
[CKPT 007] GOP: linear framebuffer found
|
||||
[CKPT 008] About to enter ExitBootServices retry loop
|
||||
|
||||
|
||||
_____ _ _ __ _
|
||||
/ ____| | | |/ / | |
|
||||
| (___ | |_ __ _ _ __| ' / ___ _ __ _ __ ___| |
|
||||
\___ \| __/ _` | '__| < / _ \ '__| '_ \ / _ \ |
|
||||
____) | || (_| | | | . \ __/ | | | | | __/ |
|
||||
|_____/ \__\__,_|_| |_|\_\___|_| |_| |_|\___|_|
|
||||
|
||||
LithosAnanke v2.1.0 aarch64
|
||||
Architecture: aarch64
|
||||
Build: Oct 14 2026 14:45:36
|
||||
|
||||
UEFI BootServices: EXITED
|
||||
Console: serial line is a PL011 at 0x0000000009000000 (no devicetree: QEMU's)
|
||||
|
||||
=== StarKernel Boot Information ===
|
||||
Memory map entries: 108
|
||||
Total memory: 4093 MB
|
||||
Usable memory: 4054 MB
|
||||
===================================
|
||||
|
||||
PMM initialized.
|
||||
PMM statistics:
|
||||
Total pages: 1039339
|
||||
Free pages : 1037928
|
||||
Used pages : 1411
|
||||
Total MB : 4059
|
||||
Free MB : 4054
|
||||
Used MB : 5
|
||||
|
||||
VMM initialized (mapped RAM, CR3 switched)
|
||||
VMM initialized (mapped RAM, CR3 switched)
|
||||
VMM self-test: mapped OK at 0xffff800000000000
|
||||
VMM self-test complete.
|
||||
|
||||
AArch64: running at EL1
|
||||
IDT installed.
|
||||
|
||||
APIC: init...
|
||||
PSCI: no DTB -- using HVC (QEMU virt-machine default)
|
||||
GICv2: no DTB GIC node -- using QEMU virt-machine defaults
|
||||
GICv2: distributor+CPU interface enabled, PPI 30
|
||||
APIC: init done
|
||||
|
||||
Timer: init...
|
||||
Timer: AArch64 generic timer initialised.
|
||||
Timer: init done
|
||||
|
||||
Kernel heap initialized.
|
||||
Heap statistics:
|
||||
Total bytes: 2147483608
|
||||
Free bytes: 2147483608
|
||||
Used bytes: 0
|
||||
Peak bytes: 0
|
||||
Heap base addr: 1207959552
|
||||
Heap end addr: 3355443200
|
||||
|
||||
Heartbeat: init...
|
||||
Heartbeat: init done
|
||||
Kernel initialization complete.
|
||||
Boot successful!
|
||||
|
||||
System: StarForth v4 (system=v4)
|
||||
StarForth v4: one host node, the F18-derived engine
|
||||
V4: capsule v4:nucleus-64.f18 signature: missing (unsigned)
|
||||
PARITY:V4_NUCLEUS name=v4:nucleus-64.f18 capsule_id=0x3b4a82485b10bfb7 capsule_hash=0x3b4a82485b10bfb7 words=311
|
||||
V4: capsule v4:forth79.4th signature: missing (unsigned)
|
||||
PARITY:V4_CAPSULE name=v4:forth79.4th capsule_id=0x4055641ee17d176b capsule_hash=0x4055641ee17d176b dict_hash=0x6b56e15226ee3719
|
||||
PARITY:V4_POST tests=538 pass=538 fail=0
|
||||
PARITY:V4_SYSTEM word_count=317 dict_hash=0xe5a57f3eb72ff94a
|
||||
PARITY:OK
|
||||
POST: PASSED
|
||||
[32m[HADES][INFO ] [0m[KRELTSC: 0] blk: raw device LBN 2048..3071 (1024 blocks)
|
||||
PCI: init...
|
||||
virtio-blk: found device
|
||||
[32m[HADES][INFO ] [0m[KRELTSC: 1390568] blk: disk 'StarForth Volume' v2 LBN 3072..789009 (785938 user b
|
||||
Artemis: virtio-blk attached
|
||||
ok>
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,164 @@
|
||||
|
||||
OpenSBI v1.8
|
||||
____ _____ ____ _____
|
||||
/ __ \ / ____| _ \_ _|
|
||||
| | | |_ __ ___ _ __ | (___ | |_) || |
|
||||
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
|
||||
| |__| | |_) | __/ | | |____) | |_) || |_
|
||||
\____/| .__/ \___|_| |_|_____/|____/_____|
|
||||
| |
|
||||
|_|
|
||||
|
||||
Platform Name : riscv-virtio,qemu
|
||||
Platform Features : medeleg
|
||||
Platform HART Count : 1
|
||||
Platform HART Protection : pmp
|
||||
Platform IPI Device : aclint-mswi
|
||||
Platform Timer Device : aclint-mtimer @ 10000000Hz
|
||||
Platform Console Device : uart8250
|
||||
Platform HSM Device : ---
|
||||
Platform PMU Device : ---
|
||||
Platform Reboot Device : syscon-reboot
|
||||
Platform Shutdown Device : syscon-poweroff
|
||||
Platform Suspend Device : ---
|
||||
Platform CPPC Device : ---
|
||||
Firmware Base : 0x80000000
|
||||
Firmware Size : 321 KB
|
||||
Firmware RW Offset : 0x40000
|
||||
Firmware RW Size : 65 KB
|
||||
Firmware Heap Offset : 0x47000
|
||||
Firmware Heap Size : 37 KB (total), 0 KB (reserved), 12 KB (used), 23 KB (free)
|
||||
Firmware Scratch Size : 4096 B (total), 1464 B (used), 2632 B (free)
|
||||
Runtime SBI Version : 3.0
|
||||
Standard SBI Extensions : ipi,pmu,srst,sse,hsm,rfnc,fwft,time,base,legacy,dbcn,dbtr
|
||||
Experimental SBI Extensions : none
|
||||
|
||||
Domain0 Name : root
|
||||
Domain0 Boot HART : 0
|
||||
Domain0 HARTs : 0*
|
||||
Domain0 Region00 : 0x0000000080040000-0x000000008005ffff M: (F,R,W) S/U: ()
|
||||
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff M: (F,R,X) S/U: ()
|
||||
Domain0 Region02 : 0x0000000000100000-0x0000000000100fff M: (I,R,W) S/U: (R,W)
|
||||
Domain0 Region03 : 0x0000000010000000-0x0000000010000fff M: (I,R,W) S/U: (R,W)
|
||||
Domain0 Region04 : 0x0000000002000000-0x000000000200ffff M: (I,R,W) S/U: ()
|
||||
Domain0 Region05 : 0x000000000c400000-0x000000000c5fffff M: (I,R,W) S/U: (R,W)
|
||||
Domain0 Region06 : 0x000000000c000000-0x000000000c3fffff M: (I,R,W) S/U: (R,W)
|
||||
Domain0 Region07 : 0x0000000000000000-0xffffffffffffffff M: () S/U: (R,W,X)
|
||||
Domain0 Next Address : 0x0000000020000000
|
||||
Domain0 Next Arg1 : 0x00000000bfe00000
|
||||
Domain0 Next Mode : S-mode
|
||||
Domain0 SysReset : yes
|
||||
Domain0 SysSuspend : yes
|
||||
|
||||
Boot HART ID : 0
|
||||
Boot HART Domain : root
|
||||
Boot HART Priv Version : v1.12
|
||||
Boot HART Base ISA : rv64imafdch
|
||||
Boot HART ISA Extensions : sstc,zicntr,zihpm,zicboz,zicbom,sdtrig,svadu
|
||||
Boot HART PMP Count : 16
|
||||
Boot HART PMP Granularity : 2 bits
|
||||
Boot HART PMP Address Bits : 54
|
||||
Boot HART MHPM Info : 16 (0x0007fff8)
|
||||
Boot HART Debug Triggers : 2 triggers
|
||||
Boot HART MIDELEG : 0x0000000000001666
|
||||
Boot HART MEDELEG : 0x0000000000f4b509
|
||||
[2J[004D[=3h[2J[009D[2J[004D[8;031;100t[2J[016DRISC-V EDK2 firmware version 2025.11-3ubuntu7.3
|
||||
Press ESCAPE within 5 seconds for boot options ERROR: C40000002:V03051002 I0 6D33944A-EC75-4855-A54D-809C75241F6C 83FFF850
|
||||
BdsDxe: failed to load Boot0001 "UEFI Misc Device" fr
|
||||
om PciRoot(0x0)/Pci(0x1,0x0): Not Found
|
||||
[2J[001;001H[=3h[2J[009DStarKernel UEFI Loader
|
||||
Loading kernel from ESP...
|
||||
[CKPT 001] Entered efi_main - ConOut live
|
||||
Monolithic build - kernel linked directly
|
||||
Collecting boot information...
|
||||
CmdLine: from starforth.cfg
|
||||
CmdLine: parsed OK
|
||||
[CKPT 004] Command line parsed
|
||||
[CKPT 005] Kernel stack allocation decided
|
||||
[CKPT 006] Boot info collected (ACPI table located)
|
||||
GOP: linear framebuffer found
|
||||
[CKPT 007] GOP: linear framebuffer found
|
||||
[CKPT 008] About to enter ExitBootServices retry loop
|
||||
Calling kernel_main (monolithic)...
|
||||
riscv64 item 4.3.5a: satp state at kernel entry (before switch)
|
||||
satp.MODE = 0x000000000000000a
|
||||
satp.PPN = 0x00000000000bf868
|
||||
__kernel_start = 0x00000000bdc90054
|
||||
riscv64: satp cleared -- Bare mode, explicit (item 4.3.5a)
|
||||
|
||||
|
||||
_____ _ _ __ _
|
||||
/ ____| | | |/ / | |
|
||||
| (___ | |_ __ _ _ __| ' / ___ _ __ _ __ ___| |
|
||||
\___ \| __/ _` | '__| < / _ \ '__| '_ \ / _ \ |
|
||||
____) | || (_| | | | . \ __/ | | | | | __/ |
|
||||
|_____/ \__\__,_|_| |_|\_\___|_| |_| |_|\___|_|
|
||||
|
||||
LithosAnanke v2.1.0 riscv64
|
||||
Architecture: riscv64
|
||||
Build: Oct 14 2026 14:50:27
|
||||
|
||||
UEFI BootServices: EXITED
|
||||
Console: serial line is a 16550 at 0x0000000010000000 (no devicetree: QEMU's)
|
||||
|
||||
=== StarKernel Boot Information ===
|
||||
Memory map entries: 100
|
||||
Total memory: 1020 MB
|
||||
Usable memory: 975 MB
|
||||
===================================
|
||||
|
||||
PMM initialized.
|
||||
PMM statistics:
|
||||
Total pages: 250258
|
||||
Free pages : 249606
|
||||
Used pages : 652
|
||||
Total MB : 977
|
||||
Free MB : 975
|
||||
Used MB : 2
|
||||
|
||||
VMM initialized (mapped RAM, CR3 switched)
|
||||
VMM initialized (mapped RAM, CR3 switched)
|
||||
VMM self-test: mapped OK at 0xffff800000000000
|
||||
VMM self-test complete.
|
||||
|
||||
IDT installed.
|
||||
|
||||
APIC: init...
|
||||
PLIC: no DTB PLIC node -- using QEMU virt-machine default (base=0x0c000000)
|
||||
PLIC: init (S-mode context 1, threshold=0)
|
||||
APIC: init done
|
||||
|
||||
Timer: init...
|
||||
Timer: RISC-V time CSR @ 10000000 Hz (FALLBACK, no devicetree)
|
||||
Timer: init done
|
||||
|
||||
Kernel heap initialized.
|
||||
Heap statistics:
|
||||
Total bytes: 536870872
|
||||
Free bytes: 536870872
|
||||
Used bytes: 0
|
||||
Peak bytes: 0
|
||||
Heap base addr: 2214588416
|
||||
Heap end addr: 2751459328
|
||||
|
||||
Heartbeat: init...
|
||||
Heartbeat: init done
|
||||
Kernel initialization complete.
|
||||
Boot successful!
|
||||
|
||||
System: StarForth v4 (system=v4)
|
||||
StarForth v4: one host node, the F18-derived engine
|
||||
V4: capsule v4:nucleus-64.f18 signature: missing (unsigned)
|
||||
PARITY:V4_NUCLEUS name=v4:nucleus-64.f18 capsule_id=0x3b4a82485b10bfb7 capsule_hash=0x3b4a82485b10bfb7 words=311
|
||||
V4: capsule v4:forth79.4th signature: missing (unsigned)
|
||||
PARITY:V4_CAPSULE name=v4:forth79.4th capsule_id=0x4055641ee17d176b capsule_hash=0x4055641ee17d176b dict_hash=0x6b56e15226ee3719
|
||||
PARITY:V4_POST tests=538 pass=538 fail=0
|
||||
PARITY:V4_SYSTEM word_count=317 dict_hash=0xe5a57f3eb72ff94a
|
||||
PARITY:OK
|
||||
POST: PASSED
|
||||
[32m[HADES][INFO ] [0m[KRELTSC: 0] blk: raw device LBN 2048..3071 (1024 blocks)
|
||||
PCI: init...
|
||||
virtio-blk: found device
|
||||
[32m[HADES][INFO ] [0m[KRELTSC: 30062697] blk: disk 'StarForth Volume' v2 LBN 3072..789009 (785938 user b
|
||||
Artemis: virtio-blk attached
|
||||
ok>
|
||||
@@ -0,0 +1,120 @@
|
||||
[2J[001;001H[=3h[2J[001;001H[2J[001;001H[8;042;160t[2J[001;001H[2J[001;001H[8;056;240t[2J[001;001HBdsDxe: loading Boot0002 "UEFI QEMU DVD-ROM QM00005 " from PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x2,0xFFFF,0x0)
|
||||
BdsDxe: starting Boot0002 "UEFI QEMU DVD-ROM QM00005 " from PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x2,0xFFFF,0x0)
|
||||
[2J[001;001H[=3h[2J[001;001HStarKernel UEFI Loader
|
||||
Loading kernel from ESP...
|
||||
[CKPT 001] Entered efi_main - ConOut live
|
||||
RAW SERIAL UP
|
||||
[CKPT 002] Serial (COM1) initialized
|
||||
Monolithic build - kernel linked directly
|
||||
Collecting boot information...
|
||||
CmdLine: parsed OK
|
||||
[CKPT 004] Command line parsed
|
||||
[CKPT 005] Kernel stack allocation decided
|
||||
[CKPT 006] Boot info collected (ACPI table located)
|
||||
GOP: linear framebuffer found
|
||||
[CKPT 007] GOP: linear framebuffer found
|
||||
[CKPT 008] About to enter ExitBootServices retry loop
|
||||
EBS...
|
||||
EBS OK
|
||||
Calling kernel_main (monolithic)...
|
||||
|
||||
|
||||
_____ _ _ __ _
|
||||
/ ____| | | |/ / | |
|
||||
| (___ | |_ __ _ _ __| ' / ___ _ __ _ __ ___| |
|
||||
\___ \| __/ _` | '__| < / _ \ '__| '_ \ / _ \ |
|
||||
____) | || (_| | | | . \ __/ | | | | | __/ |
|
||||
|_____/ \__\__,_|_| |_|\_\___|_| |_| |_|\___|_|
|
||||
|
||||
LithosAnanke v2.1.0 amd64
|
||||
Architecture: amd64
|
||||
Build: Oct 14 2026 14:53:03
|
||||
|
||||
UEFI BootServices: EXITED
|
||||
Console: serial line is a 16550 at port 0x00000000000003f8 (COM1, probed)
|
||||
|
||||
=== StarKernel Boot Information ===
|
||||
Memory map entries: 131
|
||||
Total memory: 1023 MB
|
||||
Usable memory: 966 MB
|
||||
===================================
|
||||
|
||||
PMM initialized.
|
||||
PMM statistics:
|
||||
Total pages: 248727
|
||||
Free pages : 247204
|
||||
Used pages : 1523
|
||||
Total MB : 971
|
||||
Free MB : 965
|
||||
Used MB : 5
|
||||
|
||||
VMM initialized (mapped RAM, CR3 switched)
|
||||
VMM initialized (mapped RAM, CR3 switched)
|
||||
VMM self-test: mapped OK at 0xffff800000000000
|
||||
VMM self-test complete.
|
||||
|
||||
IDT installed.
|
||||
|
||||
APIC: init...
|
||||
APIC: IA32_APIC_BASE MSR=0x00000000fee00900
|
||||
APIC: stale-ISR drain: 0 EOI(s) issued
|
||||
APIC: initialized (xAPIC MMIO, TPR=0, SIVR=0x1FF, EOI-clear)
|
||||
APIC: init done
|
||||
|
||||
I/O APIC: init...
|
||||
I/O APIC: base=0xfec00000, gsi_base=0, overrides=5
|
||||
override: source=00 gsi=2 flags=0x0000
|
||||
override: source=05 gsi=5 flags=0x000d
|
||||
override: source=09 gsi=9 flags=0x000d
|
||||
override: source=0a gsi=10 flags=0x000d
|
||||
override: source=0b gsi=11 flags=0x000d
|
||||
i8042: keyboard ACKed enable-scanning
|
||||
i8042: IRQ1 enabled in controller config byte
|
||||
I/O APIC: keyboard IRQ1 routed (masked)
|
||||
|
||||
Timer: init...
|
||||
Timer: init start
|
||||
Timer: PM_TMR_BLK discovered from FADT at port 1544
|
||||
Timer: VM mode detected (hypervisor present).
|
||||
Timer: HPET calibration disabled (VM-exit MMIO would poison timing).
|
||||
Timer: WARNING: invariant TSC not present under hypervisor.
|
||||
Timer: continuing in RELATIVE mode (no determinism guarantees).
|
||||
Timer: RDTSCP not present; using RDTSC (less serialized).
|
||||
Timer: CPUID frequency unavailable; trying PM Timer...
|
||||
Timer: trust=1 (0=NONE,1=REL,2=ABS), TSC=2098459005 Hz
|
||||
Timer: init done
|
||||
|
||||
Kernel heap initialized.
|
||||
Heap statistics:
|
||||
Total bytes: 536870872
|
||||
Free bytes: 536870872
|
||||
Used bytes: 0
|
||||
Peak bytes: 0
|
||||
Heap base addr: 24641536
|
||||
Heap end addr: 561512448
|
||||
|
||||
Heartbeat: init...
|
||||
APIC Timer: calibrating...
|
||||
APIC Timer: apic_hz=1005751102, tick_hz=100, initial_count=10057511
|
||||
APIC Timer: configured (masked, ready to start)
|
||||
Heartbeat: init done
|
||||
Kernel initialization complete.
|
||||
Boot successful!
|
||||
|
||||
System: StarForth v4 (this build's default)
|
||||
StarForth v4: one host node, the F18-derived engine
|
||||
V4: capsule v4:nucleus-64.f18 signature: missing (unsigned)
|
||||
PARITY:V4_NUCLEUS name=v4:nucleus-64.f18 capsule_id=0x3b4a82485b10bfb7 capsule_hash=0x3b4a82485b10bfb7 words=311
|
||||
V4: capsule v4:forth79.4th signature: missing (unsigned)
|
||||
PARITY:V4_CAPSULE name=v4:forth79.4th capsule_id=0x4055641ee17d176b capsule_hash=0x4055641ee17d176b dict_hash=0x6b56e15226ee3719
|
||||
PARITY:V4_POST tests=538 pass=538 fail=0
|
||||
PARITY:V4_SYSTEM word_count=317 dict_hash=0xe5a57f3eb72ff94a
|
||||
PARITY:OK
|
||||
POST: PASSED
|
||||
[32m[HADES][INFO ] [0m[KRELTSC: 0] blk: raw device LBN 2048..3071 (1024 blocks)
|
||||
PCI: init...
|
||||
PCI: ECAM mapped (amd64)
|
||||
virtio-blk: found device
|
||||
[32m[HADES][INFO ] [0m[KRELTSC: 86258235] blk: disk 'StarForth Volume' v2 LBN 3072..789009 (785938 user b
|
||||
Artemis: virtio-blk attached
|
||||
ok>
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,120 @@
|
||||
[2J[001;001H[=3h[2J[001;001H[2J[001;001H[8;042;160t[2J[001;001H[2J[001;001H[8;056;240t[2J[001;001HBdsDxe: loading Boot0002 "UEFI QEMU HARDDISK QM00001 " from PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)
|
||||
BdsDxe: starting Boot0002 "UEFI QEMU HARDDISK QM00001 " from PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)
|
||||
[2J[001;001H[=3h[2J[001;001HStarKernel UEFI Loader
|
||||
Loading kernel from ESP...
|
||||
[CKPT 001] Entered efi_main - ConOut live
|
||||
RAW SERIAL UP
|
||||
[CKPT 002] Serial (COM1) initialized
|
||||
Monolithic build - kernel linked directly
|
||||
Collecting boot information...
|
||||
CmdLine: from starforth.cfg
|
||||
CmdLine: parsed OK
|
||||
[CKPT 004] Command line parsed
|
||||
[CKPT 005] Kernel stack allocation decided
|
||||
[CKPT 006] Boot info collected (ACPI table located)
|
||||
GOP: linear framebuffer found
|
||||
[CKPT 007] GOP: linear framebuffer found
|
||||
[CKPT 008] About to enter ExitBootServices retry loop
|
||||
EBS...
|
||||
EBS OK
|
||||
Calling kernel_main (monolithic)...
|
||||
|
||||
|
||||
_____ _ _ __ _
|
||||
/ ____| | | |/ / | |
|
||||
| (___ | |_ __ _ _ __| ' / ___ _ __ _ __ ___| |
|
||||
\___ \| __/ _` | '__| < / _ \ '__| '_ \ / _ \ |
|
||||
____) | || (_| | | | . \ __/ | | | | | __/ |
|
||||
|_____/ \__\__,_|_| |_|\_\___|_| |_| |_|\___|_|
|
||||
|
||||
LithosAnanke v2.1.0 amd64
|
||||
Architecture: amd64
|
||||
Build: Oct 14 2026 14:57:46
|
||||
|
||||
UEFI BootServices: EXITED
|
||||
Console: serial line is a 16550 at port 0x00000000000003f8 (COM1, probed)
|
||||
|
||||
=== StarKernel Boot Information ===
|
||||
Memory map entries: 115
|
||||
Total memory: 4095 MB
|
||||
Usable memory: 4036 MB
|
||||
===================================
|
||||
|
||||
PMM initialized.
|
||||
PMM statistics:
|
||||
Total pages: 1034776
|
||||
Free pages : 1033253
|
||||
Used pages : 1523
|
||||
Total MB : 4042
|
||||
Free MB : 4036
|
||||
Used MB : 5
|
||||
|
||||
VMM initialized (mapped RAM, CR3 switched)
|
||||
VMM initialized (mapped RAM, CR3 switched)
|
||||
VMM self-test: mapped OK at 0xffff800000000000
|
||||
VMM self-test complete.
|
||||
|
||||
IDT installed.
|
||||
|
||||
APIC: init...
|
||||
APIC: IA32_APIC_BASE MSR=0x00000000fee00900
|
||||
APIC: stale-ISR drain: 0 EOI(s) issued
|
||||
APIC: initialized (xAPIC MMIO, TPR=0, SIVR=0x1FF, EOI-clear)
|
||||
APIC: init done
|
||||
|
||||
I/O APIC: init...
|
||||
I/O APIC: base=0xfec00000, gsi_base=0, overrides=5
|
||||
override: source=00 gsi=2 flags=0x0000
|
||||
override: source=05 gsi=5 flags=0x000d
|
||||
override: source=09 gsi=9 flags=0x000d
|
||||
override: source=0a gsi=10 flags=0x000d
|
||||
override: source=0b gsi=11 flags=0x000d
|
||||
i8042: keyboard ACKed enable-scanning
|
||||
i8042: IRQ1 enabled in controller config byte
|
||||
I/O APIC: keyboard IRQ1 routed (masked)
|
||||
|
||||
Timer: init...
|
||||
Timer: init start
|
||||
Timer: PM_TMR_BLK discovered from FADT at port 1544
|
||||
Timer: VM mode detected (hypervisor present).
|
||||
Timer: HPET calibration disabled (VM-exit MMIO would poison timing).
|
||||
Timer: WARNING: invariant TSC not present under hypervisor.
|
||||
Timer: continuing in RELATIVE mode (no determinism guarantees).
|
||||
Timer: RDTSCP not present; using RDTSC (less serialized).
|
||||
Timer: CPUID frequency unavailable; trying PM Timer...
|
||||
Timer: trust=1 (0=NONE,1=REL,2=ABS), TSC=2103119574 Hz
|
||||
Timer: init done
|
||||
|
||||
Kernel heap initialized.
|
||||
Heap statistics:
|
||||
Total bytes: 2147483608
|
||||
Free bytes: 2147483608
|
||||
Used bytes: 0
|
||||
Peak bytes: 0
|
||||
Heap base addr: 4294967296
|
||||
Heap end addr: 6442450944
|
||||
|
||||
Heartbeat: init...
|
||||
APIC Timer: calibrating...
|
||||
APIC Timer: apic_hz=1008405335, tick_hz=100, initial_count=10084053
|
||||
APIC Timer: configured (masked, ready to start)
|
||||
Heartbeat: init done
|
||||
Kernel initialization complete.
|
||||
Boot successful!
|
||||
|
||||
System: StarForth v4 (system=v4)
|
||||
StarForth v4: one host node, the F18-derived engine
|
||||
V4: capsule v4:nucleus-64.f18 signature: missing (unsigned)
|
||||
PARITY:V4_NUCLEUS name=v4:nucleus-64.f18 capsule_id=0x3b4a82485b10bfb7 capsule_hash=0x3b4a82485b10bfb7 words=311
|
||||
V4: capsule v4:forth79.4th signature: missing (unsigned)
|
||||
PARITY:V4_CAPSULE name=v4:forth79.4th capsule_id=0x4055641ee17d176b capsule_hash=0x4055641ee17d176b dict_hash=0x6b56e15226ee3719
|
||||
PARITY:V4_POST tests=538 pass=538 fail=0
|
||||
PARITY:V4_SYSTEM word_count=317 dict_hash=0xe5a57f3eb72ff94a
|
||||
PARITY:OK
|
||||
POST: PASSED
|
||||
[32m[HADES][INFO ] [0m[KRELTSC: 0] blk: raw device LBN 2048..3071 (1024 blocks)
|
||||
PCI: init...
|
||||
PCI: ECAM mapped (amd64)
|
||||
virtio-blk: no device on PCI bus 0
|
||||
Artemis: no virtio-blk disk
|
||||
ok>
|
||||
Reference in New Issue
Block a user